Vertical Boiler Economizer Heat Exchanger Tube with Max. 60t/h Capacity and 1 Year Warranty
Detail Produk
| Bahan: | Baja tahan karat atau baja karbon | Jenis ketel: | Sirkulasi Alam |
|---|---|---|---|
| Struktur: | Tabung Api | Tekanan: | Tekanan tinggi |
| Produksi Uap: | Max. 60t/jam | Gaya: | Vertikal |
| Bahan bakar: | Berbahan bakar gas | Keluaran: | Air panas |
| Standar Bahan: | ASTM, EN atau ISO | kisaran berat: | Min: 10 ton, maks: 1000 ton |
| Proses peleburan: | EF+LF+VD | Proses: | Bahan-> ingot-> panas/dingin-rolling-> Perlakuan panas-> inspeksi |
| Ut Standar: | ASTM A388 atau EN10228 | Perlakuan panas: | Normalisasi+Tempering |
| Metode Inspeksi: | 100%NDT, X-ray, γ-ray, penetran cair | ||
| Menyoroti |
Vertical Boiler Economizer,Max. 60t/h Heat Exchanger Tube,1 Year Warranty Boiler Membrane Wall |
||
Deskripsi Produk
The boiler steam and water circuit consists of three heating stages: feed water preheating, evaporation, and superheating. The boiler economizer is responsible for preheating feed water, making it the heating surface with the lowest temperature in the circuit. The working fluid passing through this equipment is monophasic water (non-boiling economizer).
- Fuel saving: Positioned at the boiler's rear, economizers reduce flue gas temperatures, resulting in significant fuel savings.
- Improved steam drum conditions: Increases feed water temperature entering the steam drum, reducing thermal stress and extending service life.
- Reduced manufacturing costs: Replaces high-temperature water wall panels with lower-cost economizer components, lowering overall boiler production expenses.
| Description | Boiler economizer |
|---|---|
| Material | Alloy steel, Carbon steel, SA210C, SA213T22, etc. |
| Material standard | ASTM, EN or ISO etc. |
| Dimension | Customization |
| Weight | Min: 10 ton Max.:1000 ton |
| Smelting Process | EF+LF + VD |
| Process | Material→Ingot→Hot/Cold-Rolling→Heat treatment (Normalizing+ tempering)→Inspection→rough machining→UT→2nd Heat treatment→finishing machining→Inspection |
| UT standard | ASTM A388 or EN10228, etc |
- Impact test and Strength calculation report with applied materials information
- 100% NDT (non-destructive inspection) report of steel plate, tube and electrode
- X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure complete boiler quality
- Hydraulic test report to verify standard working pressure and safety compliance
Sorotan Produk
Boiler Economizer Carbon Steel Stainless Steel Heat Exchanger Tube in ASME/EN/GB Standard Boiler Pressure Part Boiler Economizer Of Carbon Steel for Power Station and Industry Summary The boiler steam and water circuit consists of three heating stages: feed water preheating, evaporation, and ...
Pemanasan dinding membran permukaan Argon arc Pengelasan Untuk Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer Untuk Boiler PLTN ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Baja Karbon SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Boiler baja Economizer Bagian Pertukaran Panas Sertifikasi ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Silakan gunakan formulir kontak pertanyaan online kami di bawah ini jika Anda memiliki pertanyaan, tim kami akan menghubungi Anda sesegera mungkin.
