SA210 Gr.A1 Carbon Steel Boiler Membrane Wall Panel with φ38×4mm Tube and ASME Standard Compliance
Detail Produk
| Diameter Luar Tabung: | φ38mm | Ketebalan dinding tabung: | 4mm |
|---|---|---|---|
| Bahan Tabung: | SA210 Gr.A1 | Bahan Batang Membran: | Baja Karbon Q235B |
| Pitch tabung: | 60-80mm | Lebar Panel: | Dapat disesuaikan |
| panjang panel: | Hingga 12000mm | Metode Pengelasan: | pengelasan resistansi frekuensi tinggi |
| Tekanan Kerja: | Hingga 9,8MPa | Aplikasi: | Ketel Industri, HRSG |
| Menyoroti |
SA210 Gr.A1 Membrane Wall,φ38×4mm Carbon Steel Panel,ASME Gas Tight Welded Tube |
||
Deskripsi Produk
The SA210 Gr.A1 Carbon Steel Boiler Membrane Wall Panel is a critical pressure part designed for industrial boilers and heat recovery steam generators (HRSG). Constructed with φ38×4mm seamless carbon steel tubes welded to continuous membrane bars, this panel forms a gas-tight enclosure that ensures optimal heat transfer and combustion efficiency.
Manufactured from SA210 Gr.A1 carbon steel tubes per ASME Section II specifications, with Q235B carbon steel membrane bars. The tubes and fins are joined using high-frequency resistance welding (HFRW), creating a homogeneous, leak-proof bond that withstands high-temperature flue gas environments. Each panel undergoes 100% non-destructive testing including radiographic and ultrasonic inspection.
- Gas-Tight Construction: Continuous membrane bar welding eliminates gas leakage, improving boiler efficiency
- ASME Standard Compliance: Manufactured to ASME Boiler & Pressure Vessel Code Section I and Section II
- Superior Heat Transfer: Optimized tube pitch design maximizes radiant heat absorption from the furnace zone
- Pre-Assembled Panels: Factory-welded into modular sections for faster on-site installation
- Corrosion Resistance: Shot-blasted and primed surface treatment protects against atmospheric corrosion during storage and transport
Every membrane wall panel is hydrostatically tested at 1.5x design pressure. Material certificates, test reports, and full traceability documentation are provided with each shipment. Our ISO 9001:2015 certified facility ensures consistent quality across all production batches.
| Parameter | Specification |
|---|---|
| Tube OD | φ38mm |
| Tube Wall Thickness | 4mm |
| Tube Material | SA210 Gr.A1 |
| Membrane Bar Material | Carbon Steel Q235B |
| Tube Pitch | 60-80mm |
| Welding Method | High-frequency resistance welding |
| Standard | ASME Section I, GB/T 9222 |
Ideal for coal-fired utility boilers, biomass boilers, waste heat recovery steam generators (HRSG), and industrial process steam boilers. Custom panel dimensions and tube configurations available upon request.
Sorotan Produk
Panel dinding membran boiler baja karbon SA210 Gr.A1 dengan tabung φ38×4mm, konstruksi las kedap gas standar ASME untuk boiler industri dan aplikasi HRSG.
Pemanasan dinding membran permukaan Argon arc Pengelasan Untuk Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer Untuk Boiler PLTN ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Baja Karbon SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Boiler baja Economizer Bagian Pertukaran Panas Sertifikasi ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Silakan gunakan formulir kontak pertanyaan online kami di bawah ini jika Anda memiliki pertanyaan, tim kami akan menghubungi Anda sesegera mungkin.
